Rod Type Pre Filter In Delhi

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

Yes ! I am Interested

 Rod Type Pre Filter In Rajula Gujarat

 

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Yes ! I am Interested

 Rod Type Pre Filter In Atmakur Andhra Pradesh

 

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Yes ! I am Interested

 Rod Type Pre Filter In Tilhar Uttar Pradesh

 

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Yes ! I am Interested

 Rod Type Pre Filter In Mumbai Maharashtra

 

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Yes ! I am Interested

 Rod Type Pre Filter In New Delhi

 

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Yes ! I am Interested

 Rod Type Pre Filter In Kasauli Himachal Pradesh

 

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Yes ! I am Interested

 Rod Type Pre Filter In Bellary Karnataka

 

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Yes ! I am Interested